ART USB Dual Pre Project Series

รหัสสินค้า : ART-USB-Dual-Pre-Project-Series

ART USB Dual Pre Project Series

ปรีแอมป์สำหรับไมโครโฟน ART USB Dual Pre, USB 1.1 Digital Audio Interface with Dual Microphone Preamps , 2 Input/2 Output, ใช้ได้ทั้งกับ Mac OS และ Windows

The USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface packed into a compact rugged case.

It is designed to work over a wide variety of applications from remote field recording to desktop/studio tracking. Each of the two low noise input channels has up to 48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1/4-inch TRS. Each of the 1/4-inch TRS outputs is buffered low impedance balanced.

The USB Dual Pre is powered via the USB bus. An internal 9 Volt battery, or optional external 12V power supply (or any combination of USB, battery & power supply) can be used depending on application. When running powered by battery alone, you should expect in excess of 50 hours of operation with phantom power off. Battery life will drop to approximately 20 hours (depending on microphone) when phantom powering is engaged (still enough time to get through an average session).

Features

• USB Connectivity to Desktop and Laptop Computers
• Low Noise Fully Balanced XLR and 1/4-inch TRS Combi Inputs
• Up to 48 dB of Clean Gain n Built-in Low Noise Phantom Power Supply
• Latency Free Monitoring Mix and Level Controls
• Independent Channel Gain Controls
• 1/4-inch TRS Balanced Monitor and 1/8-inch Headphone Monitor Outputs
• Includes Audacity Recording & Production Software
• Flexible 3-way Power from USB, External Supply, or 9 Volt Battery
• Includes USB Cable – Everything Needed To Start Recording Today

Specifications

• Converters 16-bit
• Sample Rates 44.1 and 48kHz
• Analog Input 2 x 1/4″ TRS/XLR combi
• Analog Output 2 x 1/4″ TRS phone (balanced)
• 1 x 1/8″ stereo mini Headphone
• Digital Input No
• Digital Output No
• MIDI In/Out No
• Sync In/Out Not applicable
• Headphone Output Yes
• THD + N <0.01% @ 1kHz
• Dynamic Range Not specified by manufacturer
• Frequency Response 20Hz to 20kHz, +0/-1dB
• Power Requirements USB bus
• 9.5V to 12V external power supply (optional)
• 9V battery (optional)

System Requirements

• Mac: OS 9.1 or OS X
• Native USB supportPC:
• Windows 98SE/ME/2000/XP/Vista 32bit
• Available USB 1.1 Port
• Specialties No special drivers needed

Packaging Info

• Package Weight 1.5 lb 0.6kg
• Box Dimensions (LxWxH) 9.3 x 6.2 x 3.7″