KLARK TEKNIK DN200 Active

รหัสสินค้า : KLARK-TEKNIK-DN200-Active

ราคา

7,500.00 ฿

จำนวนที่จะซื้อ
ราคารวม 7,500.00 ฿

สินค้าไม่เพียงพอ

สินค้าหมด

KLARK TEKNIK DN200 Active


Active Stereo DI Box with Extended Dynamic Range and Sum/Split Options

แอ๊คทีฟ สเตอริโอ ไดเร็กบ๊อก


Product Features

  • High headroom design with +48 V phantom power for extended dynamic range
  • Sum and split options for flexible signal routing
  • Fully transformer-isolated design ensures electrical separation between PA and stage equipment
  • Balanced line inputs on Neutrik Combo* XLR and high impedance 1/4" TRS connectors
  • RCA Phono inputs for connection of consumer audio equipment
  • Independent phantom powering for each channel for maximum reliability
  • Global 20 dB input pad and earth lift switches
  • Aluminum extrusion casing with protective silicone rubber sleeve
  • Compact and rugged design
  • Designed and engineered in the U.K.


DN 200

     Building on the success of DN 100, the DN 200 offers the same high headroom, dynamic response and sonic clarity, with the added convenience of two stereo channels in the same sized enclosure. DN 200 is ideal for interfacing computers, keyboards, samplers and other electronic musical instruments to mixing consoles, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. DN 200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 kΩ load. This increased headroom means that much higher level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN 200 offers a very wide dynamic range and only requires a single -20 dB pad, which is optimized for use with electronic musical instruments. DN 200 is built to handle the rigors of life on the road, a thick aluminum extrusion protects the electronics, and in turn is covered by a tough silicone rubber sleeve.


Input Summing and Output Splitting

     DN 200 offers two flexible signal routing options, in Sum mode both inputs are summed at -6 dB to maintain the overall signal level and are routed to the left output. In Split mode, the left input is routed to both outputs at unity gain. Both option switches include LEDs for clear indication of signal routing.


Dual-Impedance Inputs

     A custom instrumentation-grade input circuit was designed for the DN 200 using advanced analogue design techniques to create the very high input impedance required by passive guitar and bass pickups, whilst keeping the actual component values low to minimize noise. This innovative approach to circuit design produces a very low noise floor, which combined with the high clipping point creates an unrivalled dynamic range in a +48 V phantom powered DI Box.


Specifications


Inputs 

  • Type Active electronic, balanced or unbalanced
  • Impedance 1 MΩ nominal, balanced or unbalanced (¼ ” TRS connectors), 20 kΩ (XLR input, RCA Phono input)
  • Connectors 2 Neutrik Combo XLR/¼ ” TRS input connectors with parallel linked RCA Phono input connectors and ¼ ” TRS linked outputs
  • connectors
  • Maxmum level +30 dBu (with pad enabled)
  • Attenuator 20 dB pad


Outputs 

  • Type Transformer balanced
  • Impedance 75 Ω
  • Connector 3 pin XLR
  • Max. Level +10 dBu with load >2 kΩ
  • Min. load 600 Ω


Performance 

  • Noise -100 dBu, 20 Hz to 20 kHz unweighted, with input terminated by 10 kΩ resistor
  • Frequency response +0.5/-1 dB 20 Hz to 20 kHz
  • Distortion (THD+N) <0.01% @ 1 kHz, +4 dBu
  • Power Requirement 
  • Voltage +48 V Phantom*
  • Current consumption <20 mA (Both channels)


Weight 

  • Net 0.95 kg


Dimensions 

  • Length 143 mm (5.6 inch)
  • Width 106 mm (4.2 inch)
  • Height 59.2 mm (2.3 inch)
Visitors: 136,733