ACM Audio M2800.2

รหัสสินค้า : ACM Audio M2800.2

รายละเอียดย่อ :

เครื่องขยายเสียง 2 x 1200 Watts Professional Power Amplifier

รายละเอียดทั้งหมด :

ACM Audio M2800.2 เครื่องขยายเสียง 2 x 1200 Watts Professional Power Amplifier 

Description

The M Series professional power amplifiers offer ACM renowned integrity and can handle exceptionally high power ratings in a compact, light weight 3RU package. The M Series amps also feature Automatic Clip Limiting to protect connected drivers;Impedance sensing to accommodate varying impedance outputs;tunnel-cooled,high efficiency heat sinks; and variable-speed DC fans to limit the operating temperature and extend amplifier life.

Specifications

Rated power bridge mode 4 Ohms: 3600Watts @ 1 kHz at <0.5% T.H.D.

Rated power (2 X 2 Ohms): 1800 Watts per channel @ 1 kHz at <0.5%

T.H.D. both channels driven

Rated power (2 X4 Ohms): 1200 Watts per channel @ 1 kHz at <0.5%

T.H.D.both channels driven

Power bandwidth: 20 Hz - 20kHz ; +0, -0. 5 dB at rate d 400 Watt s 8 Ohm power

T.H.D.(2 X 4 Ohms): <0.05%@600 Watts per channel from 20 HZ to 20 kHz

T.H.D.(2 X 8 Ohms): <0.05%@400Watts per channel from 20 HZ to 20 kHz

Minimum load impedance: 2 Ohms

Maximum RMS voltage swing: 93Volts

Frequency response: 10 Hz - 50 kHz; +0, -3 dB at 1 Watt

Input CMRR: >-65 dB @ 1 kHz

Rated power (1 X 2 Ohms): 900 Watts @ 1 kHz at <0.5% T.H.D.

Rated power (1 X 4 Ohms): 1300 Watts @ 1 kHz at <0.5% T.H.D.

Phase response: +20 to -25 from 20 Hz to 20 kHz

Input impedance: 20 k Ohms, balanced; 10k Ohms, unbalanced

Cooling: Two temperature dependant variable speed 120mm high output DC fans

Controls: Two front panel attenuators, rear panel mode switch and gain s

elect switch

Voltage gain: 0.775V, 32 dB or 26 dB

Crosstalk: >-60 dB @ 1 kHz at rated power @ 8 Ohms

Hum and noise: >-104 dB, "A" weighted referenced to rated power @ 8 Ohms

Slew rate: >25V/us

Damping factor (8 Ohms): >800:1 @ 20Hz - 1 kHz

Indicator LEDs: 2 Clip,2 signal presence, 2 active status, 2Protection

Protection: Thermal, DC, turn-on bursts, incorrect loads

Connectors: XLR, Speakon and Binding Post speaker output,

240/230 Volt 20 amp IEC mains

Construction: 16 ga. Steel

Dimensions: 132mm x 483 mm x 498 mm

Net weight: 35k g

Gross weight: 38k g