ACM Audio M2200

รหัสสินค้า : ACM Audio M2200

รายละเอียดย่อ :

เครื่องขยายเสียง 2 x 300 Watts Professional Power Amplifier

รายละเอียดทั้งหมด :

ACM-M2200 Professional Power Amplifier

Description

The M Series professional power amplifiers offer ACM renowned integrity and can handle exceptionally high power ratings in a compact, light weight 2RU package. The M Series amps also feature Automatic Clip Limiting to protect connected drivers; Impedance sensing to accommodate varying impedance outputs; tunnel cooled, high efficiency heat sinks; and variable speed DC fans to limit the operating temperature and extend amplifier life.

Specifications

Rated power bridge mode 4 Ohms: 900 Watts @ 1 kHz at <0.1% T.H.D.

Rated power (2 X 2 Ohms): 450 Watts per channel @ 1 kHz at <0.1% 

T.H.D.both channels driven

Rated power (2 X4 Ohms): 300 Watts per channel @ 1 kHz at <0.05% 

T.H.D. both channels driven

Rated power (2 X 8 Ohms): 200 Watts per channel @ 1 kHz at <0.025%

T.H.D.both channels driven

Rated power (1 X 2 Ohms): 490 Watts @ 1 kHz at <0.1% T.H.D.

Power bandwidth: 10 Hz - 30kHz; +0, -3 dB at rated 150 Watts 8 Ohm power

T.H.D.(2 X 2 Ohms): <0.1%@360 Watts per channel from 20 HZ to 20 kHz

T.H.D.(2 X 4 Ohms): <0.1%@240 Watts per channel from 20 HZ to 20 kHz

T.H.D.(2 X 8 Ohms): <0.1%@160 Watts per channel from 20 HZ to 20 kHz

Minimum load impedance: >-65 dB @ 1 kHz

Maximum RMS voltage swing: 330 Watts @ 1 kHz at <0.05% T.H.D.

Frequency response: 220 Watts @ 1 kHz at <0.025% T.H.D.

Input CMRR: 2 Ohms

Rated power (1 X 4 Ohms): 42 Volts

Rated power (1 X 8 Ohms): 10 Hz - 100 kHz; +0, -3 dB at 1 Watt

Phase response: +5 to -15 from 20 Hz to 20 kHz

Input impedance: 10 k Ohms, balanced

Cooling: Two temperature dependant variable speed 80mm high output DC fans

Controls: Two front panel attenuators, rear panel mode switch and gain select switch

Voltage gain: 0.775V, 32 dB or 26 dB

Crosstalk: >-60 dB @ 1 kHz at rated power @ 8 Ohms

Hum and noise: >-105 dB, "A" weighted referenced to rated power @ 8 Ohms

Slew rate: >30V/us

Damping factor (8 Ohms): >400:1 @ 20Hz - 1 kHz

Indicator LEDs: 2 Clip,2 signal presence, 1 active status,2 Protection

Protection: Thermal, DC, turn-on bursts, subsonic, incorrect loads

Connectors: XLR, Speakon and Binding Post speaker output, 240/230 Volt 20 amp IEC mains

Construction: 16 ga. Steel

Dimensions: 89 mm x 483 mm x 496 mm

Net weight: 16kg

Gross weight: 19 kg